Deep Water Bore – Moutere
Location
Moutere
Drilling Project Details
This was an interesting project with excellent outcome for our client.
The project involved drilling and installation of 120m deep of 150mm steel conductor casing, cementing in place, then drilling to 500m depth through glacial formation to locate a good source of potable water.
Good water located and borehole screened, bore developed over several days, the bore pump tested with excellent results, high flow, great quality water, and one very, very happy customer.
Drilling Equipment Used
Hanjin 35 Multi-Purpose Drill Rig.
Result
The client was extremely satisfied with the end results from this project.
Enquiry
Related products
-
Geotech Drilling – Tunnel 21 Seddon
Read moreGeotechnical project carried out for T&T and KiwiRail. Due to Kaikoura earthquake this tunnel was damaged and the hill was to be cut down to ‘Daylight the Tunnel’, out work was to identify strata.
-
Retaining Wall – Motueka Valley
Read moreExtensive damage due to Cyclone Gita. Project included earthworks and excavation, large diameter holes for cemented retaining wall posts, drilling and installation of ground anchors to support completed wall.
-
Mine Site Drilling – The Globe, Reefton
Read moreNice to return to a work site where we have done exploration drilling for over 20 years. This project involved drilling a series of holes to intersect an old mining tunnel/drive, 90 metres below the bottom of the old Globe Pit.
-
Horizontal Drilling – Takaka Hill
Read moreRequired to drill and install temporary casing through a variety of formations to allow the installation of 80mm conduit to carry broad band cables for Golden Bay.






