CW Drill

geotechnical drilling

Showing 1–10 of 15 results

  • CW Drill MP300 drill rig by slip on Kenepuru Road, Marlborough Sounds, NZ

    Kenepuru Road Recovery – Marlborough Sounds

    A significant Geotech project, required multiple drill rigs and crews, carrying out HQtt core drilling in remote locations with very limited access.  

    Read more
  • CW Drill geotechnical drilling on Karamea Bluffs, NZ

    Geotech – Karamea Bluffs

    After significant weather events roads North of Westport suffered damage. We  provided Geotech Drilling Services so Geotech Engineers could provide effective engineering solutions.


    Read more
  • CW Drill doing geotechnical drilling for tunnel preperation in Seddon, New Zealand

    Geotech Drilling – Tunnel 21 Seddon

    Geotechnical project carried out for T&T and KiwiRail. Due to Kaikoura earthquake this tunnel was damaged and the hill was to be cut down to ‘Daylight the Tunnel’, out work was to identify strata.

    Read more
  • CW Drill doing geotechnical and anchor drilling at Matiri Power Station, NZ

    Geotechnic & Anchor Drilling – Matiri

    Project involved extensive Geotech Drilling to understand the formation of work environment, then drilling and installing RB32 anchors through colluvium and into basement rock.

    Read more
  • CW Drill Pagani CPT Rig setup in Pohara

    Pagani 63/150 CPT Rig

    This new track mounted CTP rig is specifically for Geotechnical drilling projects. It has 50 and 100 mpa cones and is tooled to run CPTu, CPT and DPSH.

    Read more
  • CW Drill geotechnical drill rig and digger onsite at Nelson airport, NZ

    Geotechnical Drilling – Nelson Airport

    Project involved a series of drill holes for geotech purposes to determine liquefaction risks for the new Nelson Airport terminal and replacement DVR. Challenges included working in the landing flight path.

    Read more
  • Drill test by CW Drill at Dellows Bluff, NZ

    Casagrande C6 Drilling Rig

    Designed and built for soil nail, rock anchor and micro pile installation. Track mounted and fitted with a Eurodrill 2010 Rotary Percussive top head drive.

    Read more
  • CW Drill geotechnical drilling on Karamea Bluffs, NZ

    Hanjin D8D Drilling Rig

    Multipurpose rig on rubber tracks. With a High and Low Speed Head this versatile rig works exclusively on Geotechnical Drilling projects.

    Read more
  • CW Drill MP300 drill rig working on Kenepuru Road, Marlborough Sounds

    MP300 Drilling Rig

    Multi-purpose lightweight drill rig.
    The MP300 is mounted on an MST 800 Marooka carrier.

    Read more
  • Bell 204 helicopter picking up CW Drill rig

    QM750 Drilling Rig

    We designed and purpose built the QM750. Specifically designed for drilling operations that require helicopter assistance.

    Read more